JL Audio components installed into a 2018 Honda Civiic Hatchback and integrated into the OEM infotainment system.

JL Audio components installed into a 2018 Honda Civiic Hatchback and integrated into the OEM infotainment system.

Mounted LED strips to the tonneau cover of a 2015 Tundra for interior bed lighting. The strips were installed with a quick disconnect connector to allow for easy removal of the tonneau and wired to the OEM cargo lighting to allow for lighting control using a dash switch, the doors, and/or key fob.

Mounted LED strips to the tonneau cover of a 2015 Tundra for interior bed lighting. The strips were installed with a quick disconnect connector to allow for easy removal of the tonneau and wired to the OEM cargo lighting to allow for lighting control using a dash switch, the doors, and/or key fob.

Mounted LED strips to the tonneau cover of a 2015 Tundra for interior bed lighting. The strips were installed with a quick disconnect connector to allow for easy removal of the tonneau and wired to the OEM cargo lighting to allow for lighting control using a dash switch, the doors, and/or key fob.

Wrapped the interior center console pieces of a 2013 Honda Accord with carbon fiber look vinyl to dress up the large areas of flat black plastic.

Replaced the CVT shift gate in a 2013 Honda Accord with the leather boot from a 6-speed and shift knob from an Acura TSX for a cleaner look.

Replaced the CVT shift gate in a 2013 Honda Accord with the leather boot from a 6-speed and shift knob from an Acura TSX for a cleaner look.

Polk Audio components with an Alpine Power Pack and AudioConctrol LOC integrated into the OEM headunit on a 2013 Honda Accord.

Polk Audio components with an Alpine Power Pack and AudioConctrol LOC integrated into the OEM headunit on a 2013 Honda Accord.

Replaced the stock 2013 Accord horns with a pair of louder and better sounding duo tone horns for greater (aural?) visibility in emergency situations.

Installed a dashcam and hardwired the unit to reduce hanging wires and allow the unit to automatically start once the vehicle is started.

Installed a dashcam and hardwired the unit to reduce hanging wires and allow the unit to automatically start once the vehicle is started.

Installed a dashcam and hardwired the unit to reduce hanging wires and allow the unit to automatically start once the vehicle is started.

Installed H&R sport springs with Koni Sport adjustable dampers and a larger rear anti-roll bar to reduce understeer and drive more neutral the at-the-limit handling on a 2013 Honda Accord.